| |
|
| Project Management |
|
| Pond, Ellen J., and Peter Kalkert, PhD |
| Good Vibrations |
| World Cement, December 2005 |
|
| Pond, Ellen J., Andrew M. Jansen, Ben L. Cardwell, and Ed A. Buehler |
| Cost-Effective Corrosion Control, pp. 35-38 |
| World Cement, December 2003 |
|
| Benavides, F.M. |
| Engineering of Projects for Cement Plants Methods and Economics |
| Applied Automation 2nd Annual Latin American Cement Seminar in Mexico City, Mexico, 1996 |
|
| Benavides, F.M. and R.M. Schuster |
| Economic Comparison and Evaluation of an Overland Conveyor Versus Alternate Transportation Methods |
| AIME Annual Meeting, Las Vegas, Nevada, February 1980 |
|
|
| Process and Enviromental Engineering |
|
| Narayana Jayaraman |
| CO2 CONTROL TECHNOLOGY FOR CEMENT INDUSTRY |
| |
| VDZ Research Institue, 2008 |
| Young, G.L., N. Jayaraman and J. Saha. |
| Use of SNCR to Control NOx Emission from Cement Plants |
| 10th NCB National Seminar on Cement and Building Materials, New Delhi, India, November 2007 |
|
| Young, G.L., N. Jayaraman and J. Saha |
| Formation and Control of SOx in Portland Cement Kiln System |
| 10th NCB National Seminar on Cement and Building Materials, New Delhi, India, November 2007 |
|
| Young, G.L., N. Jayaraman, H. Tseng, A.F. Hollingshead, J.J. Stroker, K. Haris, S. Price and M. Morgan |
| Recommended Guidelines for Solid Fuel Use in Cement Plants |
| Portland Cement Association, PCA Serial No. EB123, 2007 |
|
| Kychakoff, G., A.F. Hollingshead and S.P. Boyd |
| Use of Acoustic Temperature Measurements in the Cement Manufacturing Pyroprocess |
| Proceedings of the IEEE-IAS/PCA 2005 Cement Industry Technical Conference, Kansas City, MO, May 2005 |
|
| Kychakoff, G., PhD, S. P. Boyd, and A. F. Hollingshead |
| "Acoustic Measurement" |
| International Cement Review, Aug. 2005 |
|
| Hollingshead, A.F. and Neumann, E.W. |
| From Mill Audit to Profit |
| International Cement Review, March 2004 |
|
| Miller, F.M., G.L. Young, and M. von Seebach |
| Formation and Techniques for Control of Sulfur Dioxide and Other Sulfur Compounds in Portland Cement Kiln Systems |
| PCA R&D Serial No. 2460; Portland Cement Association; Skokie, IL; 2001 |
|
| Young, Gerald L. and Michael von Seebach |
NOx Ababtement in Kiln Plants in the Cement Industry |
| Zement-Kalk-Gips, Volume 52, Number 6, 1999 |
|
| Young, Gerald L. and M. von Seebach |
| NOx Variability, Emissions and Contrl from Portland Cement Kilns |
| Rock Products International Cement Seminar, Salt Lake City, UT, December 1998 |
|
| Young, Gerald L. |
| Review of NOx Control Technologies for Cement Kilns, Associated Costs and NOx Reduction Efficiencies |
| Portland Cement Association, R&D Serial No. 2227, Skokie, IL, 1998 |
|
| Turnell, Victor J, G.L. Young, and J.D. Macfadyen |
| Review of Activated Carbon Injection for Control of Mercury |
| Portland Cement Association's HAPs Task Force, PCA Serial No. SP128, February 1996 |
|
| Young, Gerald L. |
| "Pulverized Fuel Firing Systems: Direct, Semi-direct, and Indirect Fired, and Conversions from One to the Other" |
| Rock Products International Cement Seminar, New Orleans, LA, December 1996 |
|
| Young, Gerald L. |
| "Environmental Affairs in Cement Plants in the U.S. " |
| Association of Cement Producers of Peru (ASOCEM), October 1996 |
|
| Young, Gerald L. |
| "Review of SO2 (HCl) Scrubbers for the Portland Cement Association's HAPs Task Force" |
| Portland Cement Association's HAPs Task Force, PCA Serial No. SP129, January 1996 |
|
| Dengler, T., A. Hollingshead and S. Shermetta |
| "Scrap Tyre Burning at Lafarge" |
| World Cement, April 1996 |
|
| Young, Gerald L. |
| "Passamaquoddy Technology Recovery Scrubber - Process Update" |
| Specialty Conference on Waste Combustion in Boilers and Industrial Furnaces, Air & Waste Management Association, Kansas City, MO, April 20-22, 1994 |
|
| Young, Gerald L. |
| "Review of the Environmental Protection Agency's Model Kiln Scenarios and Cost Estimates for Control of Hazardous Air Pollutants from the Portland Cement Industry" |
| Portland Cement Association, PCA Serial No. SP127, December 1994 |
|
| Young, Gerald L. |
| "SO2 and HCI Scrubbing Through Use of Cement Kiln Dust or Other Alkaline Wastes and Subsequent Production of Marketable By-Products" |
| 86th Annual Meeting and Exhibition, Air & Waste Management Association, Denver, CO, June 1993 |
|
| Young, Gerald L. |
| "Use of Cement Kiln Dust (and Other Alkaline Wastes) for Capture of SO2, HCI, and CO2 from Flue Gas and Subsequent Production of Fertilizer & Kiln Feed" |
| Proceedings of the Emerging Technologies Symposium on Cement and Concrete in the Global Environment, Portland Cement Association Gen. Technical Committee, Chicago, IL. March 1993 |
|
| Benavides, F.M. |
| "Air Regulations and Their Effect on the Minerals Industry" |
| SME Annual Meeting and Joint SME/CMA Exhibit in Denver, Colorado, 1991 |
|
| Young, Gerald L. and Garrett L. Morrison |
| "The Passamaquoddy Technology Recovery Scrubber at the Dragon Products Company, Inc. Cement Plant" |
| Proceedings of the Rock Products 27th International Cement Seminar, Atlanta, GA, December 1991 |
|
| Croom, J.M., M.S. May, G.L. Young, C. Phillips, and R. Mac Mann |
| "NOx Formation in a Cement Kiln: Regression Model" |
| Proceedings of the 1987 Joint Symposium on Stationary Combustion NOx Control, Electrical Power Research Institute, Palo Alto, CA, 1987 |
|
| May, M.S., J.M Croom, R. Mac Mann, J.C. Phillips, and G. L. Young |
| "Nitrogen Oxide Emissions Reduces from Cement Kiln Exhaust Gases by Process Modification" |
| Proceedings of the 1987 Joint Symposium on Stationary Combustion NOx Control, Electrical Power Research Institute, Palo Alto, CA, 1987 |
|
| Young, Gerald L., Russ Mac Mann, and John Croom |
| "Technical Report of the Demonstration of the Feasibility of NOx Emissions Reduction at Riverside Cement Company, Crestmore Plant" |
| South Coast Air Quality Management District, El Monte, CA, 1986 |
|
| Young, Gerald L. |
| "The Development of a Production Batch Size Planning Program to Improve The Profitability of a Large Southern California Cement Plant" |
| M.A. Thesis, Redlands University, Redlands, CA, 1982 |
|
|
| Structural Engineering |
|
| Etse, G., E. Martel and R. Fernández |
| "Dynamic Computational Analysis" |
| World Cement, May 2003 |
|
| Etse, G., D. Sfer, I. Carol, G. Gettu |
| "Failure Analysis of Concrete under Multiaxial Stress States" |
| Computational Mechs. in Applied Sciences and Engg. CIMNE. Barcelona. 2000 |
|
| Etse, G |
| "Fracture Energy-based Plasticity Formulation for Failure Analysis of Anchor Bolts in Concrete" |
| Int. Journal of Nuclear Engineering, Ed. Int. Association for Structural Mech. in Reactor Technology, 1998 |
|
| Moller, O., G.Etse, A.Giuliano, M.Rubinstein |
| "Computational Analysis of Non Linear Dynamic Behavior of Reinforced Concrete Frames" |
| IV World Congress on Comput.Mech. Buenos Aires, 1998 |
|
| Etse, G. and K. Willam |
| "A Fracture Energy-based Constitutive Theory for Inelastic Behavior of Plain Concrete" |
| Journal of Engineering Mechanics, American Soc. of Civil Engg. September 1994 |
|
| Etse, G. and K. Willam |
| "Numerical Description of Tensile Failure Processes in Concrete" |
| Numerical Models in Fracture Mechanics of Concrete. A.A. Balkema Publishers, Rotterdam/Brookfield. 1993 |
|
| Etse, G., P. Steinmann, K. Willam |
| "Rechnerische Erfassung von lokalisiertem Betonversagen im Zug-- und Druckbereich (in german) " |
| Finite Elemente --Anwendungen in der Baupraxis--, Karlsruhe, Germany, 1992 |
|
|
| Electrical & Automation Engineering |
|
| Dugan, T.B. |
| "Reducing the Flash Hazard" |
| Cement Industry Technical Conference, 2006. IEEE Phoenix, Arizona, 2006 |
|
| Green, Jack, Stroker, John J. |
| "New Power System for Monarch Cement" |
| IEEE IAS/PCA Cement Conference, Kansas City, Kansas, 2005 |
|
| Stroker, John J. |
| "Power Grid Reliability for the Cement Industry" |
| IEEE IAS/PCA Cement Conference, Chattanooga, Tennessee, 2004 |
|
| Stroker, John J. |
| "Higher Efficiency - What is the Real Cost? " |
| IEEE IAS/PCA Cement Conference, Jacksonville, Florida, 2002 |
|
| Stroker, John J. and Jack H Green |
| "Ball Mill Drive Motor Choices" |
| IEEE/PCA Cement Industry Technical Conference, Salt Lake City, Utah, May 2000 |
|
| Jenkerson, David L. |
| "The Challenges and Benefits of Computer Automation at River Cement" |
| Rock Products Cement Seminar in San Francisco, CA., 1992 |
|
| Stroker, John J. |
| "Moving the Crusher to the Stone" |
| In Gateway Engineer, Dec. 1991 |
|
| Stroker, John J. and Dewey Gray |
| "Electrical Equipment Specifications: Design vs Economics" |
| I.E.E.E. Cment Industry Technical Conference, Lancaster, PA, 1981 |
